G23LH & G2D

Goped Depot Pipe

Ripped off from the Engine Trix design, one of the best Go-Ped pipes of all time, this replica pipe is imported as an inexpensive copy.

This item mounts very solidly and is wrapped around the top and rear of the motor for a balanced look and feel, with a center bleed exit for adding on a silencer.

This pipe does require use of the handle pole extension.

*This is a replica and although is identical in looks and design, is not made by Engine Trix

etp-r

Click here for more product information

Engine Trix pipe

This is the best overall performance from a Go-Ped pipe. It is an excellent choice, but the JetPro pipe is now a serious competitor. This item mounts very solidly and is wrapped around the rear of the motor for a balanced look and feel.
At $179.99 it is one of the more expensive pipes, but you do get what you pay for.
This pipe does require use of the handle pole extension.

et-pipe

Click here for more product information

JetPro Pipes

FREE TANK COVER WITH ALL BLACK PIPES

All JetPro pipes DO NOT require handle pole extenders.The JetPro Go-Ped Pipe is designed to give dramatic increases in bottom end response and midrange acceleration while substantially increasing top speed.

Top - New Sport Pipe with Silencer

Middle - Original Pipe for Sport, X-ped, Liquimatic, Bigfoot and Quad

Bottom - Bigfoot Pipe with Silencer

jppipe

Click here for more product information

JetPro Needle

gives that stock carb the feel of an HP Carb

jpneedle

ADA Series 1 - Rev

ADA Series 1 Rev Pipe

Designed for midrange to top speed
Spring mounted, center bleed chamber
Exclusive => Tunable, 4 different tuning combinations with spacers
Fits all Go-Peds® with G23LH, G2D, G230RC & HP reed engines
4-5mph top speed gain over stock exhaust on G23LH

*Complete includes everthing needed for installation
**Pipe only does not include hardware mounting kit

gpex1

Click here for more product information

ADA Series 2 - Torque

click here for directions

ADA Series 2 Torque Pipe

Designed for midrange to top speed
Spring mounted, center bleed chamber
Exclusive => Tunable, 4 different tuning combinations with spacers
Fits all Go-Peds®
Fits G23LH, G2D, G230RC, & HP reed engine
4-5mph top speed gain over stock exhaust on G23LH

*Complete includes everthing needed for installation
**Pipe only does not include hardware mounting kit

gpex2

Click here for more product information

Pipe Hardware Kit

Pipe Hardware Kit

Includes all necessary hardware to install your pipe

gpexhk

The Nickel Plated PMW pipe

The Nickel Plated PMW pipe

uses the frame as a silencer like the stock go-ped and gives very good top speed. This pipe does require use of handle pole extension

The Factory Pipe

The flat black look is more race-like and that is exactly what this pipe is for. Great bottom-end and midrange performance make for an excellent choice for the race enthusiast.
At $129.99 it is the most affordable of all the pipes. (sorry about the picture)
This pipe does require use of the handle pole extension.

fpipe

Eliminator Pipe

Eliminator fits all Go-Ped^® models except Geo and GSR.

Over the top design

elimpipe

Click here for more product information

J pipe

Comes in Chrome or Works finish

click the link to the right to see more pics

j-pipe

Click here for more product information

PSWS Aluminum Silencer

This beautifully machined, fully rebuildable silencer works with ALL Race Pipes, and even the stock muffler. Extremely light weight, absolutley NO Loss in performance, cancels out high frequency resonances. Looks SO cool! Can be mounted directly to center bleed pipes, or will replace the frame tube allowing it to be used with any style exhaust system.

Stalker Exhaust System

Billet aluminum
Packed and baffled for noise reduction
Installs without disassembly
Finned for maximum heat dissipation
700-1000rpm increase over stock G23LH exhaust
Increase low & midrange power
Unique muffled sound at low rpm
Eliminates almost all high pitch 'crackling' noise when decelerating
Not much louder than a stock exhaust connected thru the frame
Much quieter than tuned pipe or modified canister
Includes stainless allen mounting bolts

Click here for more product information

Re-Packing Kit (2pcs)

Stalker only needs to be repacked when there is a noticable increase in sound level. Time may vary, as with silencers for motorcycles.

X Can

X Can Exhaust with bottom stingers

Finally a muffler that not only gives you great low end and extra top speed
it also looks great too! Tests have shown an increase of over 1000 RPM's
which can mean a 2-3 MPH gain depending on spindle size. It's a 2 piece
billet aluminum muffler made of 6061 T-6 aircraft aluminum with two stingers
that lock into place with included o-rings. Machined into it is a heat sink
header that not only reduces temperature, but adds a "header" effect more
like a tuned pipe for better low end. The X-Can includes everything you will
need. Includes 2 part muffler, 2 stingers (1.5" long), 2 O-rings, gasket,
all hardware and instructions. The X-Can is great for the guy that does
street freestyle and does not want the heat and weight of a tuned pipe.
Tuned pipes can also cause cylinders to brake and lost of leg burns. Can be
used with any Go-Ped with any motor and with all models there is no need for
cutting of your plastic engine cover. Add the X-port for even
more low-end performance.

This will fit the stock G-23 motor, the G230RC, G2D motor and The all
new Geo motor.

xcan

Click here for more product information

X Can V2

X Can Exhaust with side stingers

Same great performance as the original X-Can but with a new twist in style. With the stingers coming out the left side it not only has a cool look but also keep oil off your rims. You can add the chrome elbows for an even cooler look. Also, a small baffle machined into the inside of the X-Can V.2 increase torque and lowers sound level slightly

xcanv2

Click here for more product information

X Can Elbows

Chrome X Can Elbows

You ask for it, you get it. Now you can add these new chrome plated elbows to your stingers to deflect all the oil away from your wing nut and wheels. Its easy, just push them onto your current stingers and use loctite or epoxy glue
and your ready to go.

xelbow

Click here for more product information

X Port Exhaust Manifold

The X-Port is another new and innovative idea . It’s a small port that’s made of 100% billet aircraft aluminum. You can add this X-Port to your stock canister muffler, your X-Can or Tuned pipe. You will get the header effect without buying a tuned pipe

Comes in Small, Medium and Large widths

xport

Click here for more product information

Pro Flow Manifold

The Pro Flow Manifold from Earth Surfer replaces the stock manifold that comes with your pipe.

*Helps your tuned pipes work to its full potential.

*Computer designed shape allows exhaust gasses to escape cylinder more effectively.

*100% CNC machined from 6061-T6 aluminum billet.

* Fits the G23LH, G230RC, G2D and Geo motors that have pipes with a 7/8” outer diameter header inlet. (you may need to buy or modify your pipe springs depending on your set-up)

proflow

Click here for more product information

Exhaust Bracket - Bigfoot

Heavy duty preformed exhaust bracket. For use with ADA Series 1 & 2 exhaust pipes. This is not required to install an ADA pipe, the bracket included with the pipe kit will work. This bracket is a heavy duty mount for extreme applications.. May also fit other pipe brands. Mounts to top 2 engine mount screws.

Choose from Aluminum for light weight or Steel for added strength

Fits: Bigfoot - Go-Quad - Super Bigfoot - Super Go-Quad

Click here for more product information

Billet Handle Pole Lock Extension.

GPH-100

Billet Handle Pole Lock Extension. Be able to still fold & carry your Go-Ped with a tuned pipe.

Long 7"

Short 5"