Sport Spindles & 3rd Bearing Supports

Engines

Air Filters

Carbs

Exhaust
Custom Exhaust Pipes

Bigfoot Spindles & 3rd Bearing Supports

Sport Spindles & 3rd Bearing Supports

Larger drive spindle = more top speed and less acceleration
Stock Sport™ spindle size is .575" diameter
Too large of a spindle may result in less top speed on less modified engines
Rider weight also affects spindle size and top speed
Spindle size is measured in inches, ex. .625" = 5/8 inch
O'rings are only for hardened long drives
Harder spindles wear tires quicker
Stainless spindles are the best compromise of spindle and tire wear

Go-Ped® Short Drives

Replaces stock drive on Sport™ and X-Ped™
Knurled for traction
Made from stainless steel
Stock drive size is .575"

*NOTE: To remove the stock spindle, it may be necessary to purchase a drive puller

Larger drive will increase speed and lose acceleration,
depending on riders weight and engine modifications done
.750" & .800" spindles may not fit with new tire,
this will vary from one Go-Ped to another

gpsd

Click here for more product information

Sport™ Long Drive Stainless

Must use long drive with 3rd bearing support
For use on Sport™ & X-Ped™ | Can be used on Liquimatic™, but it eliminates the clutch
Drives are NOT warranteed against wear or improper installation

NOTE: To remove the stock spindle, it may be necessary to purchase a drive puller.
*Spindles .750" and larger may not fit with a new tire, due to frame variances

gpld

Click here for more product information

Sport™ Long Drive Aluminum

NOTE: To remove the stock spindle, it may be necessary to purchase a drive puller.
*Spindles .750" and larger may not fit with a new tire, due to frame variances

gplda

Click here for more product information

Sport™ 3rd Bearing Support

Standard 3rd Bearing Support Kit

A must for jumping | Protects against crankshaft breakage
Must use long drive with 3rd bearing support | For use on Sport™ & X-Ped™
Can be used on Liquimatic™, but it eliminates the clutch

gpbsk

High Performance 3rd Bearing Support

Same as above but Uses high performance Japanese sealed bearing
Available in silver only
Hi-Perf 3rd Bearing Support Kit -

gpbskhp
Weight: 3.00 lbs

Click here for more product information

Replacement Standard Bearing

Replacement Standard Bearing for standard 3rd bearing support

Replacement High Performance Bearing

Replacement High Performance Bearing for High Performance 3rd Bearing Support

6202
Weight: 1.00 lbs

6x20mm Button Head Allen Bolt(3 required)

6x20mm Button Head Allen Bolt(3 required) Sport™ 3rd Bearing Support

6mm Nylock Nut(3 required)

6mm Nylock Nut(3 required) for Sport™ 3rd Bearing Support

6mm Fender Washer(3 required)

6mm Fender Washer(3 required) Sport™ 3rd Bearing Support

Spindle Bolt

Pick your size

Weight: 1.00 lbs