Note - when you use this kit, your stock motor will not work, you have to use a clutch drive type of motor, this kit will only work on the regular Bigfoot scooter, will not fit the Geo Bigfoot.
Click here for more product information
The spindle remover bolt is 12 x 40mm.
These spindles have a diamond knurl pattern
These drives are to be used with the ADA Bigfoot™ 3rd bearing support.They can also be used as a replacement for the stock Bigfoot™ drive,but doing so requires the use of a Sport™ drive spindle bolt (6mm x 45mm).
Bigfoot 3rd bearing supportincludes: billet bracket, spring, hardware, drive bolt & pullerWorks with stock clutch or with ADA Posi-Lock kitSuperbigfoot requires additional adaptorMust use ADA Bigfoot™ support drive
Posi-Lock kit Only works with ADA Bigfoot™ 3rd bearing support)Adjustable fixed tensionLocks engine to tire, eliminates clutch
Super Bigfoot Lock-out Adaptor Adaptor kit to make the stock Super Bigfoot lock-outwork with the ADA 3rd bearing supportIncludes: 8x30mm hex bolt, 8mm lock washer,8mm flat washer, & steel bushing
Engine lock-down linkage for new style Bigfoot™ Go-Ped®. Fits yellow Bigfoot™ frame only(same as Super Bigfoot™). Also a replacement for the stock Super Bigfoot™ lock-down. Mounts to stock frame and stock engine mount. If used with ADA 3rd bearing, must also use SBF lock-out adaptor. Includes linkage and mounting bolts. Fits: Bigfoot - Super Bigfoot
